Meguin Montage Paste 48

DESCRIPTION Assembly Paste 48 is used for basic and maintenance lubrication for assembly and repair work in all areas. Ideal for running in sliding surfaces and plain bearings. This paste consists of a select combination of solid lubricants. Wear can be significantly reduced using Assembly Paste 48.-

PROPERTIES

- Good adhesion properties
- Optimum wear protection
- Outstanding emergency operation lubrication
- Good corrosion protection
- Minimum friction

TECHNICAL DATA

Color : gray-black
Base : Mineral oil
Additives (solid lubricant) : MoS2 33 %, graphite 6 %
Density at 20 °C : 1.3 g/cm2
Press-Fit Test, kinetic friction : 0.12 μ
Thread friction : 0.09 μ
Operating temperature
range : -35 °C to 450 °C

AREAS OF

APPLICATION For basic and maintenance lubrication in all technical areas.

APPLICATION Depending on the existing conditions, Assembly Paste 48 may be applied to the clean sliding surfaces using a paint brush, brush or lint-free cloth. Can be applied in excess.

AVAILABLE

PACK SIZES LM 48 Assembly Paste 1 kg Part no. 9031